Monitoring is available through SNMP Management when both card is placed in FRM220 rack with SNMP management. The management can view the converter card’s status, type, version, fiber link status and alarms. The card can be configured to enable or disable the port, reset the port, and configure receive threshold levels for path switching.

Features

• Latch feature if power is lost the switch remains in its current state
• Protection transition < 50 ms (FRM220-OPS51)
• Protection transition < 20 ms (FRM220-OPS52)
• Works with any combination of 1 ~16 wavelengths
• Traffic is switched in one of three modes : revertive, non-revertive, manual (OPS52) or non-revertive, manual (OPS51)
• Programmable Rx threshold setting for switch-over
• Optical Interface Type: LC connectors
• Working and protected lines are physically separated fiber
• Supports auto-switching delay time can be set in auto-switch mode.